Following the tremendously positive reaction in Europe and the US from dealers and players to the UNICO, Schertler is pleased to introduce David, a more compact acoustic instrument combo amplifier. Featuring the same high attention to quality and sound, David is perfect for the artist requiring only two input channels.
From preamplifiers to loudspeakers, all components were selected for their natural and accurate response. Two power amps with an active crossover supply 50 watts to the 6″ woofer and 30 watts to the 1″ dome tweeter. The result is velvety, clear harmonics with a controlled, strong low end (down to 40 Hz). The technology of biamplification produces a very transparent sound as well a providing maximum efficiency by properly matching amplifiers to loudspeakers.
In addition, each power amplifier features limiter circuitry to deliver secure speaker protection. Amplifiers are built with bipolar transistors (no MOS-FET) and are powered by a robust, traditional power supply (toroidial transformer).
David’s innovative CLASS-A circuitry and built-in analog spring reverberation deliver the warm, smooth and musical sound that acoustic musicians have been seeking. Whether your instrument is guitar or violin, mandolin or cello, listen to your playing through David. You’ll be amazed!
The insert jack does put effects across both channels. Channel 1 provides switchable 48V of phantom power to power microphones. Channel 2 has 10V switchable phantom power for Schertler and other instrument pickups that require 10 volts. Both Channels have switchable input sensitivity. Good for adjusting to various passive or active pickups.
Both Channels have 3 bands of EQ, plus Channel 1 has a resonance control that provides a cut at 180 cycles. (This helps cut some boominess/feedback you might have in a Dread body)
The Stat line channel also has a high cut switch to reduce the harshness that some pickups may have.
Also, there are 3 outs on the Master Section:
1. Direct XLR
2. 1/4″ Line Out
3. 1/4″ Aux Out with its own volume control
Also, there is a Low Cut switch (Below 150Hz) for use with a active Subwoofer for Bass applications.
Size: 11.82″x 13.4″x 9.65″
Weight 24 lbs
Manufacturers Warranty 2 years
