DjangoBooks.com

Mario Maccaferri Plays Classical Guitar Pt.2

These two MP3s are the only suriving recordings of Mario Maccaferri:

MP3: Bach

MP3: Granados

mario3.jpg

The plastic guitar

Like the plastic clothespin before it, however, the plastic ukulele was merely a stepping stone to Maccaferri’s higher ambition of making a plastic guitar. Let’s face it, ukes hardly represent a great sonic challenge, but making a guitar out of Dow Styron? That’s something else altogether!

The Maccaferri plastic guitar debuted in the Spring of 1953. The introduction was extensively covered by The Music Trades in May of ’53, which reported a press luncheon thrown by Dow Chemical for Mario Maccaferri at the Waldorf-Astoria hotel in New York on April 29, 1953.

Described in glowing terms – lunch must have been great – Maccaferri introduced two guitars and emphasized the resources and cost of developing his new guitars. Indeed, Amos Ruddock of Dow’s plastic merchandising department indicated that the project took two years of testing various formulations of Styron and another Dow plastic called Ethocel and that tooling up cost around $350,000.

The Music Trades quoted Maccaferri’s speech at length. While referring to a painting of legendary violinmaker Antonio Stradivarius working at his bench with a few simple tools, Maccaferri remarked, “A like painting symbolizing such craftsmanship today would have to suggest the following elements: 1. Some idea of the enormous industrial resources and scientific know-how of America today; 2. Not one genius, but a dozen of them; 3. The pile of money necessary to accomplish the task.”

After citing famous musicians and composers, particularly Paganini, who played the guitar for their own personal enjoyment and wrote music for it, Maccaferri continued, “I have always promised myself that one day I would make a good guitar at a popular price. I had no idea that I would end up by making a plastic guitar. But when I realized that plastic would offer me the chance to make a perfect instrument with none of the shortcomings known in the wooden guitar, it did not take long to decide and satisfy my life’s ambition. So, I went to work.

“Often in my lifetime of playing guitar, I have had disappointments in its performance. On many occasions I would find the instrument’s neck warped or the fretting defective, or the body of the instrument expanded or contracted, caused by humidity or dryness; thus making my guitar simply unplayable. Anyone playing the guitar knows what I mean.

“Although today’s fine wooden guitars are the result of 300 years of guitar making experience, I do not hesitate to say that our 1953 all-plastic guitar compares favorably with any wooden guitar made.

“This all-plastic guitar wasn’t an easy job, as you will understand. We had a lot of engineering problems and it represents quite a costly venture for us, but the Dow Chemical Company came up with suitable materials and we overcame the other problems. To this instrument we have applied all the improvements that guitar players have been seeking in it for many years. It has beauty and it is easier to play – it produces music in perfect pitch, and it has good tone and plenty of it. And this all-plastic guitar is not subject to any of the shortcomings mentioned earlier.”

Heavyweight support

While Arthur Godfrey was a great endorser of Maccaferri’s Islander Ukulele, it might surprise you to learn that Maccaferri brought his plastic guitar to the world bearing the endorsements of none other than classical maestros Andres Segovia, his old friend from the Twenties, and Rey De La Torre, and pop-jazz great Harry Volpe. De La Torre and Volpe attended the luncheon and performed on Maccaferri guitars, making the guitar “speak for itself,” after which Maccaferri himself was prevailed upon to toss up a “lively Neopolitan melody with skill and dexterity.”

G30 and G40

The two guitars Maccaferri introduced at the Waldorf were described as “full, master size instruments,” “the flat-top, arched bottom, cutaway model retailing at $29.95; and the DeLuxe Arched Top at $39.95.” While the denomination is strange, it’s these which would quickly be known as the G30 and G40, respectively. Both had similar, Selmer-like shapes with the Maccaferri square cutaway, the former with a flat top, the latter with an arched top. Pictured in the article are Maccaferri and Volpe getting down with a pair of plastics, Maccaferri on a G30, and Volpe holding a striking version of what looks like a G40 with an ivory (a.k.a. “maple”) fingerboard. These are quite remarkable pieces of technology, each composed of more than 100 separate parts, not all plastic, to be truthful.

Both had fancy headstocks with Maccaferri’s patented planetary tuning machines. These were “banjo” style tuners with a 14:1 ratio, a patented design using three interlocking gears. The G30 had a molded-in bridge assembly to which the strings attached and a separate plastic saddle glued in. The G40 had a glued-on archtop-style bridge and a fancy trapeze tailpiece. Both had two f-holes. Curiously enough, wooden struts were glued under the tops. The tops were ivory, the sides and backs done up in a swirled reddish-brown rosewood color. Both were, by the way, steel-stringed guitars, not nylon stringed instruments like the Islander ukes. One point to note: early G30s had only the molded bridge assembly. Some time later a plain metal trapeze tailpiece was added. This did not serve as the anchor for the strings, but either as some sort of added support for the bridge assembly or as merely decoration.

The most curious design elements concerned the neck. The neck was bolted on the guitar in an early version of a slightly cutaway heel. The outside of the neck consisted of two pieces of plastic, the outer back and the fingerboard. The fingerboard bore actual frets and white position markers (which are actually part of the back and how the parts are aligned). Inside there’s a metal sheath, referred to as an “armored neck,” and at the core a piece of wood. This design was guaranteed never to warp.

Already we’ve described a pretty interesting bit of guitar design, but wait, there’s more! This neck was essentially a neck-through design. The inner core ran all the way through the body to the endpin. There it was notched and had a threaded bolt running perpendicular to it. This bolt had a couple nuts above and below the neck core and was slotted. By removing a metal plug from a hole on the top of the guitar down at the bottom of the lower bout, you can use a screwdriver and basically adjust neck tilt and therefore action by tightening or loosening this bolt!

OK, we have a plastic guitar with a warp-proof neck, perfect intonation, adjustable action and pretty natty faux-rosewood looks. Let’s cut to the chase. How does it sound? Well, beauty is in the ear of the beholder, but in my opinion pretty good, indeed. The tone is not really like a typical wood sound. In some ways it’s sort of like an acoustic variant of the Strat’s out-of-phase sound, kind of funky. In a good one, the balance and sustain are quite remarkable. Of those I’ve personally played, I’ve found the newer ones to have better sound, and I prefer the tone of the flattop G30 to the more upscale archtop G40. If I were a recording artist, I’d consider a G30 as an indispensable part of my studio arsenal, and would never apologize for the tone.

More toys

With all the fuss over the introduction of Maccaferri’s plastic guitars, they went over among guitarists, well, like a plastic guitar. Guitar players, as you know, are a pretty conservative lot when it comes to instruments, and the Maccaferris probably were never able to shed the “toy” image. Some reports suggest that quite a few of these guitars were sold, however, how many is unknown.

Despite the luke-warm reception of the plastic guitars, Maccaferri forged ahead with his plastic instrument empire. In the Winter of 1953 the Islander Baritone Ukulele was added to the line, just in time for the holiday season.

In a February 1954 ad in The Music Trades, the Maccaferri line included the new Islander Baritone Ukulele ($12.95), the G30 ($35.95 with case) and G40 ($45.95 with case) guitars, the U150 Islander Ukette ($1.00), the C100 Chordmaster attachment, the U400 Islander Ukulele ($3.95), the U600 Islander DeLuxe Ukulele and MU25 Midget Uke ($.25). Both Islander Ukes came in a “Combination” package (UC500 for $4.95 and UC700 for $6.95); just what that combination consisted of is unknown, but was probably the Chordmaster and accessories, as before.

In an undated catalog supplied by Michael Lee Allen, probably from around this time based on pricing, the Maccaferri uke line consisted of the Islander uke ($4.50 alone, $5.70 with Chordmaster, books and accessories), the T.V. Pal, a stripped down version of the Islander ($1.75), the Islander DeLuxe ($5.95), and the Islander Baritone ($12.95).

The Islander Guitar

Also introduced in February of 1954 was the No. G16 “Popular-Priced” Islander Guitar. This was basically a standard acoustic flattop version of the fancier G30. This was 35″ long, 13″ wide and 4°” deep. It had a round soundhole and the same bridge unit as the G30. The neck had the same design as its bigger brothers, although it is unknown if the action was adjustable as on the f-hole models.

The coolest thing about the G16 was the choice of finishes. It could be had with mahogany grain body, ivory top and ebony fingerboard, with mahogany grain boy and top with an ivory fingerboard, and with an ebony grained body and top with ivory fingerboard. These had the typical Maccaferri headstock with planetary tuners.

The classic Maccaferri G30, G40 and G16 plastic guitars were kept in the line until the instrument business was ended in 1969, although production was sporadic during these years. The Maccaferris’ typical approach was to make a large batch of products and then inventory them until more were needed. How many of these guitars were actually produced over the years is impossible to tell, but there were quite a few sold, although certainly not approaching the 9 million uke mark. When the remaining assembled stock was liquidated in the early ’90s, nearly 5,000 instruments were still available.

The Romancer

In June of 1957 Maccaferri introduced the Romancer Classic Style Guitar, No. R20. This was advertised as a “standard-size” guitar, 35″ long, 13″ wide and 4°” deep. It featured Maccaferri’s patented planetary tuners and fancy headstock. The body and neck had now become a single molded unit, more like the ukuleles than the elaborate bolt-on affair on the G30/G40/G16s. The copy alludes to “Wood-armoured neck and body,” which we can presume to mean there was wood reinforcement inside the neck and probably wooden struts. The neck and body were made of “grained ebony” plastic, while the top and fingerboard were ivory, silkscreened with decorations. The body had music staves looking like ribbons and five different musical scenes of teens getting down. One was a trio (a la Kingston), two guys solo, a little jazz combo with a piano (a la Nat King Cole?), and a guy and gal duo. The position markers on the fingerboard were little pictures. The Romancer came with a rope strap, guitar method and pick, “very easy to play, and luxuriously finished – the ideal guitar for any type of music – from classical to popular, folksong, Calypso, Rock ‘n Roll, etc.”

ShowTime

Among the later plastics was the ShowTime classical guitar shown here, a nylon-stringed axe with teen scenes which, based on the look of the teens is probably circa 1960 vintage. This looks to be another iteration of the Romancer. Although the headstock contains Maccaferri’s trademark planetary tuners, this guitar has a molded neck attached to the body similar to the Romancer. Instead of inlaid metal frets, this has plastic frets molded into the fingerboard and painted silver. Despite this unflattering description, again the tonal response is quite good. Hey, it isn’t a Ramirez, but for what it is, a plastic classical, it has a distinctive character.

Electrics

Among the many whimsical plastic Maccaferri designs of this era was a brief early ’60s excursion into electric guitars with the small Maestro electric tenor guitar. This guitar had four strings and a short 18*” scale, and contained its own battery powered amplifier. Strings attached either to a trapeze tailpiece or onto the bridge, as the player desired. The Maestro had one single-coil pickup at the lead position. Tuners were the basic open-backed variety.

Sometime during this period Maccaferri also added various plastic horns to his repertoire.

Introducing the Beatles…

The last notice of Maccaferri’s instruments occurred in the July, 1964, The Music Trades, in which the new “Beatles” line was discussed. The company was now identified as Mastro Industries, Inc. Introduced in March of ’64, significantly at the Toy Show in New York, the Beatles line marked a final burst of success for the Maccaferri venture. Maccaferri had obtained the exclusive U.S. license to market official instruments using The Beatles name.

Included were four Beatle guitar models made of “Beatle Red” and “Beatle Orange” injection molded polystyrene plastic bodies. The ivory tops included brown printed portraits of the Fab Four with reproductions of their signatures. Two four-string tenor guitars were offered, the Jr. Guitar and the Four Pop, and two small-bodied six-strings, the Yeah Yeah and the Beatle-ist. Construction appears to be similar to that of the ShowTime. Each came with instructions, song book and a pick.

The Mastro Beatle line also included a set of Ringo Drums, plastic bongo drums and a plastic banjo. There was also a miniature Pin-Up guitar which was a 5″ replica of the real Beatle plastic guitar!

According to the article in The Music Trades, Mastro had already shipped 500,000 of the Beatle guitars and was projecting two million by the end of the year. Whether or not Maccaferri ever met that projection is unknown, but Beatlemania, too, began to spread out and change quickly as the fans grew older and the pace of the decade picked up.

1965 plastics

A good picture of the mature Maccaferri Mastro line can be seen in the 1965 catalog. Top of the line were the G-40 archtop and G-30 flat top, followed by the Showtime No. 1020 (sans decoration) and Romancer No. 1010. By this time both the Showtime and the Romancer had an amazing neck design which featured a tension screw inside the body at the heel accessible with a long screw driver. Tightening or loosening the screw changed the neck tilt and therefore the action.

Also available were the G-16 Islander Guitar, the 35″ Mastro G-10 Guitar with armoured neck, and the 31″ Mastro G-5 Guitar.

In addition, there were two versions of the 30″ nylon-stringed Sonora Guitars No. 727. The A-SH was in a marbled woodgrain color, while the IC was in cream and black. Under these were the No. 500 TV Pal Guitar in two colors (PIC) or woodgrain (A-SH). The No. 775 Western Guitar featured singing cowboys, bucking broncos, boots and saddles on the front.

Still in the line were a small Maestro electric six-string and tenor guitars. The GTA-5 Electric Guitar was a 32″ woodgrain-colored non-cutaway acoustic with a small humbucker attached near the bridge. The wiring came out the treble side through a tube into a small housing with a volume control and jack for a mini-plug. The CT GTA-5 Tenor Cutaway Electric Guitar was basically a four-string version, with the optional string attachment at the tailpiece or bridge. These guitars had a new patent-pending design which featured a rigid metal beam which ran through the guitar from the nut to the heel, detouring toward the back once inside the body. Both were played through the matching TA-5 Mastro Amplifier, a small 5-watt portable transistor amp with a 6″ speaker, operating off two 9-volt batteries.

The recently introduced Beatle line was also available, of course. Beatles guitars included the 30°” Beatle-Ist Guitar (No. 340), the 22″ Beatles Yeah-Yeah Guitar (No. 330), the 21″ Beatles Four Pop Guitar (No. 320, four-string), and the 14°” Beatles Jr. Guitar (No. 300). The 22″ Beatles Banjo (No. 350) was offered, as were the Beatles Ringo Snare Drum (No. 380), the Beatles Beat Bongo (No. 360), the Beatles Big Beat Bongo (No. 370), and the Mastro Beatles “Pin-Up” Guitar, miniature guitars you could clip on your shirt. All had portraits and signatures of the Fab Four on the front.

Two cutaway baritone ukes, the Mastro TV Pal (No. 610) and the Islander (No. 410), were offered, as well as the woodgrained Mastro Cutaway Tenor Guitar (No. CTG-6) and the TV Pal Cutaway Tenor Guitar (No. 666). Ukes included the Mastro Uke (No. 750), the Islander Uke (No. C-400), the Mastro Jr. Guitar (No. 725, a uke with six-strings) and the TV Pal Uke (No. 120). Two Chordmaster units were available, the Automatic and the Visual Chordmaster, complete with little lights to let you play the uke without lessons! The Mastro Ukette (No. 100) was still around, as well as the Mastro Banjolele (No. 110) and the Banjo Uke (No. 520).

Two plastic violins were offered, the cream-colored Square Dance Fiddle (No. 700) and the woodgrained Stradivarious Violin (No. 1000), both with plastic bows.

Finally, six wind instruments were available, a trumpet in gold or cream, a saxophone in gold or red, and a clarinet in gold or black. There were also six percussion instruments, a set of bongos, three maracas (rumba, bolero and rhythm), castanets and a remarkable plastic snare drum.

Gitarina

In 1966 the Mastro plastic line continued unabated with several new curious additions. Most curious was the Gitarina (No. 222), 25″ double-cutaway hollowbody acoustic basically looking like a Strat with an asymmetrical three-and-three headstock. This had 20 frets, the end of the fingerboard cut in a groovy stairstep design. Soundholes were twin “split-ribbon” shapes.

Also new were two electrics, the GTA-10 Electric Guitar and the Teen Electric Guitar. The GTA-10 was basically a 35″ woodgrained Romancer (with neck-tilt adjustment) and the Mastro pickup. The Teen was a woodgrained 30″ guitar with a small transducer pickup. Both could be played through the TA-5 amp, or the new TA-10 10-watt amp, or the smaller TA-3 3-watt amp (powered by 1° volt batteries). If you wanted to plug these amps in, a new AC Power Transformer was now available.

Summer of Love

In 1967 Mastro enhanced the line once again. Most of the old plastics were still available, but new things were added. The Gitarina was the main focus of expansion. On the downside was the Monkey (No. 102), a tiny uke version of the acoustic Strat, now with a four-in-line headstock. Upside was the Disco Cutaway Guitar (No. 352), basically the Gitarina with a small pickguard sort of surround on the lower soundhole, triple rectangle fingerboard inlays, and a fancier bridge with tailpiece.

New, too, was the 30″, nylon-stringed Riviera Guitar (No. 303), a slightly offset double-cutaway with ribbon soundholes with little circles in the middle, a six-in-line headstock and optional bridge or molded tail string attachment. An upscale version of this was available called the Jet Star, with more coloration, a pickguard surround on the lower soundhole, a metal tail, and with triangular inlays. The Riviera (No. 551) was an electric version with a transducer pickup attached to the lower bout connected to the Mastro 4.11 amplifier.

The Sonora acoustic got a lift with the addition of the nylon-stringed Deluxe Sonora (No. 325). This had trapezoidal inlays, a black pickguard and a metal tailpiece. The nylon Mastro G3 Guitar (No. 358) was basically the same guitar with traditional worm-gear tuners, rather than friction pegs. The woodgrained Mastro G5 Guitar (No. 452) was virtually the same, too, except for hollow rectangle position markers and the through-body metal beam reinforcement.

Also new was the 32″ cream-and-colored Mastro Classic Guitar (No. 451), pretty much identical to the G3. This was available as the Classic Electric Guitar (No. 552) had the same transducer and 4.11 amp as the Riviera electric.

Plastic denouement

All this new development ended up as the end of the road.

In around 1967, Mario Maccaferri had an episode with his heart which precipitated some new thinking about his priorities. Other events were conspiring to confirm his conclusions.

Not long after his recovery, in 1969, Maccaferri plastic guitars received a bad review. This was, after all, the era of The Graduate, the movie which almost single-handedly defined “plastic” as counter-counter-culture. Mario, never one to brook irrational opposition, decided if people were going to criticize his work, he would stop giving them something to criticize. Despite the fact that a huge number of plastic guitars were in various stages of completion, Mario said, “No more,” and all parts were boxed up and put into storage.

At the same time, in 1969, Maccaferri decided to get out of the plastic instrument business altogether. The designs, molds and other equipment for making his more toy-oriented plastic creations were sold to Carnival industries, another plastic novelty company. Carnival never figured out what to do with the Maccaferri legacy which it purchased, and no Maccaferri plastic instruments were ever made again.

8-Track tapes

Never ones to remain idle, the Maccaferris continued to work in plastic, however. In around 1970 or ’71, RCA came to Mario with the idea for an 8-track cassette, needing plastic housings. Mario designed and produced the first 8-track cassette housing. Unfortunately, RCA had his design and process copied, closing out a major business opportunity. Nevertheless, Maccaferri turned his invention to good turn, and he sold many of these 8-track housings to other manufacturers. Eventually, in the later ’70s, Maccaferri expanded into making cassette tape housings, as well.

Saving the reeds

In around 1981 several events occurred to wind down Mario Maccaferri’s commercial ventures. One event was simply that Maccaferri was getting tired of making cassette housings, and wanted to get out of the plastic business. Another was that the city of New York wanted Maccaferri’s building and purchased it from him. Rather than beginning over again at a new location – Mario was already 80 – Maccaferri decided it was time to stop and to liquidate the factory.

In 1981 almost all of the equipment was auctioned off for a relative pittance and Mario retired. However, Maria was not ready to stop, and diverted the auctioneer from the reed-making equipment. She asked Mario to give her the reed making business. She had, after all, been involved with it since she was 16 years old. Mario agreed and signed the reed business over to Maria Maccaferri.

From that day on until his death, Mario would always tell Maria that “you’re the boss” when it came to the reed business, although Maria adds that Mario was really always the boss.

As of this writing Maria Maccaferri continues as President of the French American Reeds Manufacturing Company, making reeds primarily for various private label retailers, rather than put the effort into advertising and marketing the Maccaferri brand. Among those labels which are really Maccaferri reeds, by the way, is the name Selmer…

Plastic violins

Although commercial production of instruments had ended at the end of the ’60s, in his later years Maccaferri continued his interest in making instruments. For the remainder of his life he went to his workshop every day at 7:30 a.m. and continued working on various projects, including the development of a remarkable travel guitar, a classical guitar which folded up into its own body – without detuning – becoming the size of a shoebox, and a radical new plastic violin design. This violin project was completed in 1990 and a public debut was conducted at the Weill Recital Hall at Carnegie Hall. The critics were less than generous about the violin, but Mr. Maccaferri was feted by a number of chemical companies for his pioneering work in the field of plastics.

Although I never had the pleasure of his acquaintance, there has never been an account of meetings with the Mastro Maestro which didn’t relate his warm nature and genuine enthusiasm and camaraderie with anyone who loved guitars.

Mario Maccaferri passed away on April 16, 1993, at the age of 92.

Many Maccaferri plastic guitars and other instruments remained unsold after 1969 and were stored at the Mastro warehouse in the Bronx for many years. Periodically lots of these would be liquidated to hopeful dealers, the first beginning in 1982, with a final purge being made shortly before Maccaferri’s death in 1993, with many instruments going both to A.S.I.A. and Elderly Instruments in Lansing, although most of these have been sold by now. There should be little trouble in finding new old stock Maccaferri plastics, and they are well worth seeking out, particularly the G30 and G40 models, with their funky tone and fascinating technology. Much harder would be finding Mario Maccaferri’s older Selmer and Maccaferri guitars, which now command prices well into the five figure range.

21st Century guitars?

In retrospect, there’s no denying that Mario Maccaferri’s vision of inexpensive but good guitars made out of plastic was Quixotic, but the time has come to recognize them for the visionary instruments they were. It’s highly unlikely that the idea of building acoustic guitars out of injection-molded plastic will prove to be the wave of the future, but increasingly luthiers are searching for alternative materials to the scarce tonewoods traditionally put into guitars. And, at this writing, at least one company, Kuau Technology, Ltd., of Maui, Hawaii, markets RainSong guitars, steel-string and classicals made entirely out of graphite, advertised as “stable and durable, impervious to climate,” objectives laid out by Mario Maccaferri way back in 1953. So, who knows? Who would have thought how prophetic were the words of Mr. Robinson when he put his arm around Dustin Hoffman and said, “Plastics?”

However the next century turns out, we can certainly conclude that Mario Maccaferri contributed mightily to the guitar cause over the course of the 20th Century, as a trailblazing classical guitarist, award-winning luthier, and plastics innovator, the father of the plastic guitar. That Mario Maccaferri’s best-known achievement should be his plentiful, accessible and totally delightful plastic instruments may not be totally adequate, but then again, how many of us are so fortunate to leave living epitaphs that serve as memorials to our creative vision?

Home  |  Forum  |  Blog  |  Contact  |  206-528-9873
The Premier Gypsy Jazz Marketplace
DjangoBooks.com
USD CAD GBP EUR AUD
USD CAD GBP EUR AUD
Banner Adverts
Sell Your Guitar
© 2024 DjangoBooks.com, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.015895 Seconds Memory Usage: 1.010468 Megabytes
Kryptronic