The DPA IMK4061 is an instrument microphone kit that includes the 4061 lavalier, DAD6001 Microdot to XLR-male adapter, holders for stringed instruments, universal surface mounts, magnet mount, foam windscreens, frequency altering protection grids, and storage case.
The 4061-BM features an omni-directional polar pattern, ideal for close miking musical instruments. The omni-directional pattern provides a generous pick and even frequency response at the direct and off-axis sections of the microphone capsule.
The 4061-BM is capable of withstanding sound pressure levels up to 144dB, resulting in a high tolerance for transient (peaking) audio signal without noise caused by distortion and overload. The wide 20Hz to 20kHz frequency response of the microphone allows the lavalier to be used for capturing a wide array of signal sources. A high frequency boost protection grid is included, providing a brighter, "airy" response. The microphone is powered via 48V phantom power source and is suitable for capturing strings, brass, woodwinds, guitar, percussion and more.
Complete Instrument Microphone Kit
Everything needed for close miking instruments is included. The kit contains the 4061 lavalier, DAD6001 Microdot to XLR-male adapter, holders for stringed instruments, universal surface mounts, magnet mount, foam windscreens, frequency altering protection grids, and storage case.
Omni-Directional Polar Pattern
The omni-directional polar pattern of the 4061 provides an even, smooth frequency and sensitivity response at the off-axis and direct sections of the capsule.
Exceptional Signal Response
A wide frequency response of 20Hz to 20kHz result in transparent smooth sonic character no matter the source. The 4061 can handle high sound pressure levels without noise caused by peak distortion.
Small Unobtrusive Profile
The miniature lavalier design allows flexible microphone placement and positioning.
Transducer Pre-polarized Condenser
Polar Pattern Omni-directional
Frequency Response 20Hz to 20kHz +/- 2dB (3dB soft boost at 8-20 kHz)
Preamp Frequency Range: 20Hz to 50kHz (+0dB/-3dB)
Dynamic Range (Typical) not specified by manufacturer
Signal-to-Noise Ratio 26dB A-weighted
Maximum Input Sound Level 144dB SPL
Power Requirements 48V Phantom Power
Output Impedance 30 to 40 ohms
Output Connectors 3-pin XLR Male
Low Frequency Roll-Off High Frequency Boost Grid Included
Dimensions Microphone Length: 0.5in (12.7mm)
Cable Length: 5.9ft (1.8m)
Weight 7.5g (0.26oz)